Tuesday 2 July 2019

British Engineering Stamps



Stamps are something we all use to post or letters and many country's celebrate things by depicting them on their postage stamps. I have been collecting First day covers and Presentation packs for a number of years now and when I realised that the D Day stamps were coming out I went onto the Royal Mail website and ordered the ones I wanted. While browsing I noticed one called British Engineering and one stamp in particular caught my eye. 

 What you have is the Raspberry Pie, the Falkirk Wheel, The Catalytic converter, the Crossrail machine
on the bottom the MRI Body Scanner and the Synthetic bone grafting material 

 Now what caught my eye was the Body Scanner. Something some of you have witnesses first hand no doubt having been put through one.  What was it about the scanner which was so important to me that I had to buy the stamps. Well I worked at the factory where it was made. One day I was walking up to the stores when I passed but the guy's who just happened to be working on the parts for the scanner and saw this rather large object they were working on. At the time It just looked like a load of rings with epoxy resin on and as I did not work with them I just carried on with what I was working on in another part of the factory.

This is the original scanner Oxford Instruments made, I borrowed the photo from a Book written by Lady Wood about Oxford Instruments so I hope she will not mind an old employee using it. Not long after this it was shipped to Nottingham University where I happened to go a while later to install some equipment. While I was there I went off to lunch with one of the Grad Students and walked passed this room where I could see the scanner you see above, there were a pair of feet and leg's sticking out of the end of the scanner. I mentioned this to the student who told me that it was a a body from the morgue over in the nearby hospital, seems they send them over to be tested out in the scanner. I found that a little creepy. That was the last I saw of the scanner till I went to the Science Museum in London where I saw it again on display least part of it, I was told they could only use two rings as the other two added were to heavy for the floor. I wonder if it is still there.

 The factory I worked at was in this building in Osney Mead Oxford the place is now called the Kings Building

On the wall you will find this plaque. Does make you feel proud to be associated with the company that built the scanner in the first place and that it became such a success. The one thing I will always remember about the scanner is those feet poking out of the scanner.
Taking Part in Our World Tuesday

14 comments:

  1. What you all can show just on a snippet of paper. Beautiful.

    ReplyDelete
  2. Replies
    1. It was, I went to a lot of places installing equipment, I can honestly say I have seen both sides of the Pacific just never did the middle

      Delete
  3. Great story! As an engineer, I'm happy to see some engineering accomplishments depicted on postage stamps. Usually engineers never get any recognition (only the blame if something doesn't work!)

    ReplyDelete
  4. That is such a cool story. I love your personal connection to the MRI scanner and now to the stamp!

    ReplyDelete
    Replies
    1. Lots of my friends worked on the version that people are more familiar with

      Delete
  5. What a great story you've told here. I've been in one of those machines two or three times. It's sort of comforting to know that I'm acquainted with someone who worked where it was created.

    ReplyDelete
    Replies
    1. Well if it said Oxford or Semens it was one of ours

      Delete

Thank you for visiting, I welcome comments and will return the visit to you. I would love for you to consider following me if you enjoy my work. If you would like to follow by email you can subscribe at the top of the right had column
PLEASE MAKE YOUR BLOG WORD VERIFICATION FREE